HotPaw Morse Code apps

HotPaw Productions has been developing unique apps for the iPhone and the iPad since the iOS App Store first opened. HotPaw Productions also develops Morse Code. apps for Mac OS X.

Morse Code Apps for iPhone and iPad

morse decoder icon Morse Code Decoder

The HotPaw Morse Decoder (in the iOS App Store and the Mac App Store) is a Universal app for iPhone, iPad and iPod Touch (and now available as a Mac OS X app as well) which translates audio International Morse Code and CW audio into text using advanced DSP signal analysis techniques. The HotPaw Morse Code Decoder app includes both a spectrum viewer and an optional narrow band audio filter. It now supports decoding up to 80 WPM. The HotPaw Morse CW Decoder app has been featured in an issue of ARRL Contest Update.

  • Morse Code Decoder iPhone Screenshot

    Morse Code Decoder Features:

    • Decodes microphone input to text.
    • Includes signal level and audio frequency spectrum viewers.
    • Automatic audio tone frequency detection.
    • Optional narrow-band audio filter for manual frequency selection.
        Audio Tone Frequency range: 300 to 1400 Hz
        Just tap on a frequency peak in the spectrum viewer to manually set the filter frequency.
    • Decoding range from 4 to 40 WPM (Normal mode).
    • Automatic or Manual WPM setting on iPad.
    • Automatic WPM detection on iPhone and iPod Touch.
        NOTE: If you use automatic tone frequency or WPM detection, it may take several successive characters (containing both dits and dahs) in a row before decoding starts to detect characters properly.
    • Configuration option for QRQ decoding (40 to 80+ WPM).
    • Configuration option for Farnsworth timing.
    • Automatic or Manual decode threshold level setting.
        Configurable depending on the input (microphone) volume level and the signal-to-noise ratio.
    • Signal-to-noise-floor Histogram.
        The signal level Histogram is next to the signal level waveform viewer.
    Help/ReadMe text file for the Morse Code Decoder app
    New: The Help file now includes many Helpful Hints for users who can't get the Morse Decode to start decoding at all. Please read this Help File if you are having problems.

    morse decoder icon Morse Code Decoder Pro

    The Pro version of the iOS Morse Decoder (available from the iOS App Store) also continuously saves the previous 1 minute of audio to allow re-decoding using new settings. This is useful if one misses some decoded text because the WPM or tone frequency was set inaccurately.

    morse code ringtone icon Morse Code Ringtone Maker

    Morse Code Ringtone Maker can create ringtones containing your own customized Morse Code messages. Be different... don't bore people with yet another pop tune ringtone for your iPhone.

    (* Apple does not allow custom ringtones to be installed directly to an iPhone from an app. Instead the ringtones you create using Morse Code Ringtone Maker need to be installed on your iPhone either using iTunes (on a Mac), or using the Garageband iOS app, which requires multiple steps to create and install a ringtone. See typical 3rd party instructions here and here.
    You can also use newer releases of iTunes to install your ringtones. See here.)

    Older Morse Ringtone Readme documentation.

    LED decoder icon LED Flashlight & Morse Code Decoder

    LED Morse Decoder and Flash Commicator (available from Apple's iOS App Store) can flash Morse Code using the camera flash on the iPhone 4 and decodes Morse Code flashes, as viewed through a virtual camera viewfinder.

    Morse2Text icon Morse2Text

    The Morse2Text converts Morse code tapping on your iPhone touchscreen into text. You can use this app to input text to your iPhone without looking at the display. Copy the text to use in another app, or email it directly from the app. Both straight key and an iambic keying mode are supported.


    Text2Morse translates text into high quality Morse Code sounds. Configurable WPM, Farnsworth timing and tone frequency.


    MorseTest generates 5 character random letter groups from a configurable letter set and at a configurable WPM to help one learn to hear and receive Morse Code. Both the the number of characters to be used and the order of new characters added are configurable for study using the Koch method. Word and dot timing are independently configurable to allow using Farnsworth timing.

    Morse Words

    Morse Words randomly plays the 250 most common English words in Morse Code. Configurable WPM, timing and tone.

    Morse Code Key

    MorseKey is a Free app available from the App store. Tap and it will generate an audio tone. Both straight key and an iambic keying mode are supported.

    Mac OS X Apps

    Morse Decoder

    The HotPaw CW Morse Decoder for the Mac in the Mac App Store.
    The features and capabilities of this Mac OS X app are the same as that of the Morse Decoder app for iOS. See the description of the Morse Code Decoder for iPhone/iPad above.

    Morse Decoder for Mac OS X Help/ReadMe text documentation file.

    Basic Programming Apps

    Basic app icon HotPaw Basic for iOS

    HotPaw Basic (in the iOS App Store)

    Write and run Old-Fashioned Basic programs on your iPhone, iPod Touch or iPad. HotPaw Basic for iOS is very similar to the popular Chipmunk Basic in BASIC programming language support and features.

    What is Morse Code ?

    Morse Code is an encoding or modulation scheme used for telegraph and radio communication. It is still used in Amateur Radio for the CW mode of transmission, as well as in aviation navigation aids (such as VORs) and other identification beacons.

    In Morse Code audio, the timing of a sequence of short and longer audio tones is used to represent each character of a text message. (For instance, a short tone, say at 700 Hz, followed by a tone 3 times longer, and separated by a short gap of silence, represents the letter 'A'). Using sequences of short dots and longer dashes for Morse Code dates back to around 1840, when is was created by Samual Morse and Alfred Vail for use with their invention of the telegraph (several decades before the invention of the telephone). At first, Morse thought that dots and dashes would have to be transcribed onto paper tape to be received, but it was found the telegraph operators quickly learned how to copy down Morse Code messages just by listening to the clicking sounds the code made as the relays or electromagnets opened and closed.

    Morse Code was heavily used, not only for sending telegraph messages, but also from the earliest days of radio communcation. Radio receivers commonly demodulate short and long bursts of constant frequency continuous wave (CW) signals into short and long audio tones. To represent short and long tones, the tones are commonly called dit and dah, instead of the written or graphed dot and dash. Up until 2007, passing a Morse Code test was required for most U.S. FCC Amateur Radio licenses. Until the late 1990's Morse Code was the International standard for maritime distress signals, but no longer so. However, Morse Code (or the CW mode) still has the narrowest bandwidth requirements for communication that can be simply decoded by a human (e.g. without a digital computer or signal processor).

    Morse Code is still used in Amateur Radio communication; and several frequency bands, labeled as CW, are allocated for Morse Code.

    The dot and dash encodings are now part of an ITU International Standard.

    Here's a simple International Morse Code Table.

    Learning to understand and copy Morse Code messages might be thought by some to be difficult. But learning Morse Code usually only requires a sufficient amount of repeated practice time, especially when using methods similar to those pioneered by Koch and Farnsworth. These training methods (simplified) allow learning the difference between just 2 or 3 character or letter sounds at a time, with extra time between at first. (My MorseTest iOS app can be used in just this way to learn just a few characters at a time.)

    More Morse Code Resources


    HotPaw Productions also provides iPhone/iOS app development and DSP consulting services for the most technically challenging problems. HotPaw Productions was founded by Ron Nicholson, who was a member of the original Macintosh, Amiga, and N64 design teams, as well as one of the first PalmOS developers. Enterprise iOS apps co-architected by Mr. Nicholson include Wyse PocketCloud, which has been among the Top Grossing apps in the Business category of the iTunes App store.


    Many of the HotPaw icons were created by LizDesign


    Contact Hotpaw Productions


    HotPaw Production iOS apps are distributed in the hope that they might be useful, but WITHOUT ANY WARRANTY OF ANY KIND; not even the implied warranty of MERCHANTABILITY or FITNESS for ANY PARTICULAR PURPOSE.

    Apple, iTunes, App Store, iPhone and iPad are registered trademarks of Apple Inc. in the U.S. and/or other countries.